Passer aux informations produits
1 de 2

Snow Performance

Snow Performance ProLine Universal Boost Cooler Stage 2E Power-Max Water Methanol Injection Kit

Stock:
Prix habituel €892,43
Prix habituel €901,56 Prix soldé €892,43
Vente
Correspondance des prix

Disponible sur commande

En savoir plus sur livraison de la commande en stock.

En Stock

Recevez votre commande par demain si commandé dans
00 hours
00 mins
00s.

L'obtenir avant le

Recevez votre commande demain. Sous réserve de disponibilité.

Cumuler 0 points

L'achat de ce produit vous rapportera 0 points de fidélité d'une valeur de €0,00 EUR.

Garantie de correspondance des prix

Si vous trouvez un prix inférieur sur le site Web du détaillant, nous l'égalerons.

The latest development from SNOW Performance!
Complete Water-Methanol Injection Kit with freely programmable 52mm OLED-Gauge and ProLine steel flex lines.

Integrated System Monitoring and Display of Boost Pressure, Fill Level and Injection Quantity. Upgradable to Dual Stage Technology.

*Fits all turbocharged engines up to 3.5bar boost.

Depending on the performance of your turbo / supercharged engine, we choose the right Boost Cooler nozzles. For all engines with two separate intakes (e.g. V-engine), 2 Boost Cooler nozzles must be installed (1 for each inlet).

Select the desired size of your Boost Cooler fluid tank. A 3l tank is included in every Boost Cooler system. For more comfort and range, we recommend upgrading to the 9.5l or 26.5l tank installation set.

Includes the Proline Steel Braided Line.


Optimal Cooling with Water Injection

Snow Performance BMW Boost Cooler Stage 2E Power-Max - ML Performance EU

 

Obtain up to 10-25% more power in your turbo- or supercharged engine, even if it´s pre-tuned, by using the Boost Cooler™-Water/Methanol Injection System!

The main function of the Boost Cooler is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger. Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern leanburn engines.

Furthermore, the Boost Cooler doesn't create an intake restriction like an intercooler, and unlike race gas, it reduces intake air temps up to 60°C and improves charge air density too.

Snow Performance systems effectively steam clean the valves, valve seats, and even the piston tops and intake when they inject. This reduces carbon build up. The Boost Cooler™ can be installed in a matter of hours without having to remove bumpers or do custom intake piping.

 

Snow Performance BMW Boost Cooler Stage 2E Power-Max - ML Performance EU
  • Boost referenced injection control
  • For use with all centrifugal superchargers (ProCharger, Vortech) and large turbos (*)
  • Complete with our industry leading 300 PSI UHO pump and Hypersonic Nozzles?
  • Dual Stage Technology
  • 2 nozzle control independently of one another
    (Optional, Upgrade Art.No.: SP10350 required)
  • 52mm gauge style progressive water-methanol controller
  • Dual tone 7 color OLED screen
  • Efficient Intercooling, up to 60°C lower air intake temperature
  • Achieve approx. 116-Octan rating, by using ordinary 95-Octan gasoline
  • Reduces EGT and oil temperatures
  • Allows you to run safely more boost and/or more timing
  • Reduces thermical stress on NOS, LPG/Autogas and pre-tuned engines like chiptuning & higher boost levels
  • No wear issues, only clean combustion chambers
  • No loss of boost as with an intercooler
  • Reduces the specific fuel consumption
  • Easy installation

     

    More Power by Boost Cooler

    Snow Performance BMW Boost Cooler Stage 2E Power-Max - ML Performance EU

    With the Boost Cooler, you can achieve up to 10% extra power for suction engines. The optimal cooling compensates for power losses at higher outside temperatures. In addition, deposits in the combustion chamber and intake manifold are reduced.

     

    116 Octane Race Gas Performance

    Snow Performance BMW Boost Cooler Stage 2E Power-Max - ML Performance EU

    Water or water/methanol is injected into the intake air using the patented high-pressure pump. The evaporation mist achieves extremely effective intake air and intercooling, whereby, among other things, an uncontrolled combustion ("knocking") is prevented. The effect is demonstrably comparable with 116 octane racing gasoline.

     

    Perfect for nearly all turbocharged engines

    Snow Performance BMW Boost Cooler Stage 2E Power-Max - ML Performance EU

    For positive displacement superchargers (Eaton, Twin Screw) and small fast spooling turbos see (e.g. K03/K04 turbochargers) use the Boost Cooler Stage 2 MAF or our Stage 3 kits for best performance.

     

    Dual Stage Technologie (DST)

    The Stage 2 has the ability to progressively command 2 Hyper-Sonic? Nozzles independently of one another. This sophisticated dual stage injection management yields the highest increases in HP and cooling along all stages of the engine allowing you to greatly increase the boost & timing of your vehicle safely.


    Stage 2 POWER-MAX Europe Edition

    Snow Performance BMW Boost Cooler Stage 2E Power-Max - ML Performance EU

    Die Europe-Edition (display & programming in BAR) is exclusively available only by Snow Performance Europe and its European authorized dealers.


    52mm OLED Control Unit

    Snow Performance BMW Boost Cooler Stage 2E Power-Max - ML Performance EU

    The all new Snow Performance Stage 2 Boost Cooler water-methanol injection system comes fully revamped for all turbodiesel vehicles as also trucks, marine applications and so on. It uses a progressive 52mm-gauge style controller that proportionally injects more or less according to boost pressure.

    Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability.


    Snow Performance BMW Boost Cooler Stage 2E Power-Max - ML Performance EU
    • 1 x High Pressure Diaphragm Pump 300+ PSI
    • 1 x VC50 Controller (Since 2017 without separate Holder)
    • 2 x Nozzle
    • 1 x 3l Boost Cooler Reservoir
    • 1 x Low level indicator (includes LED and an EZ installation gommet)
    • 1 x ProLine Steel Braided Line (3 metre)
    • 1 x 1/4" Nozzle Holder, 90° Steel
    • 1 x Installation material
    • 1 x Installation instructions


    Universal Fitment

    Including All turbo-/supercharged engines up to 2.1 bar/30 psi of boost pressure. 

    This includes BMW engines; N20, N54, N55, S55, N63, n63tu, M57, B38, B48, B58, S63, and s63tu.

    This is compatible with both Petrol and diesel cars.

     

    To ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number or the last 7 digits of your VIN. Simply enter your car details prior to checkout. 

     

    The settings on OLED control unit can be made within a few seconds without any prior knowledge. The only thing you need to determine is at what boost pressure the injection is to begin and what the maximum boost pressure is. - The variable injection of the Boost Cooler is performed within these two preset boost pressure points. By using the optionally Dual Stage Technology, you´re able to set a 2nd nozzle mapping for optimized injection quantity especially at higher engine load states.


    SP10250PRO

     

    Manufactured by

    Snow Performance


    Fitted Photos

    Installation inside the engine compartment

    Snow Performance BMW Boost Cooler Stage 2 Water Injection - ML Performance EU

     

    VC-MAF Controller

    Snow Performance BMW Boost Cooler Stage 2 Water Injection - ML Performance EU

     

    Reservoir with 9L capacity inside the trunk

    Snow Performance BMW Boost Cooler Stage 2 Water Injection - ML Performance EU

     

    LCD-Controller

    Snow Performance BMW Boost Cooler Stage 2 Water Injection - ML Performance EU
    • Garantie de correspondance des prix

      Nous nous efforçons de leur donner le meilleur prix. Si vous trouvez un prix inférieur pour le même article sur un site Web de détaillant français légitime, nous l'adapterons.

    • Livraison gratuite

      Pour les articles sélectionnés avec une icône de livraison gratuite, nous offrons à certains pays la livraison gratuite

    • Aide d'experts disponible

      Nos lignes de contact sont ouvertes du lundi au vendredi de 8 h à 17 h, heure allemande. N'hésitez pas à nous donner un cri si vous avez des questions / problèmes.

    1 de 3